Getting IPTV for LG Smart TV running smoothly depends on your webOS version — newer LG TVs can install apps directly from the LG Content Store, while older models need a sideloading workaround. This guide covers both.
Method 1: LG Content Store (Easiest)
- Press the Home button on your LG remote.
- Open the LG Content Store and search for an IPTV-compatible app.
- Install the app, then log in using your IPTV Stremio Xtream Codes or M3U details.
Method 2: Developer Mode Sideload
If your preferred app isn’t in the store, enable LG Developer Mode via the Developer Mode homebrew app, then sideload the APK using LG’s official Developer Mode app on a PC connected to the same network.
Method 3: Screen Casting
No time to sideload? Cast from a phone or laptop running an IPTV app straight to your LG TV using built-in screen share — a fast, no-install option that works on every webOS version.
Choosing the Right App for LG
For LG TVs, we recommend apps with a TV-optimized interface — see our best IPTV for Smart TV comparison for app-by-app recommendations.
webOS Version Differences
Newer webOS versions (22 and above) have a more open Content Store with more IPTV-friendly apps, while older LG TVs (webOS 3-5) often need the Developer Mode sideload method since fewer third-party apps are approved for those versions. Check your TV’s webOS version under Settings > General > About This TV before choosing a setup method.
Using LG’s ThinQ Companion App
If direct installation proves difficult, LG’s ThinQ mobile app can mirror your phone’s screen to select LG models, giving you a quick fallback method identical to standard screen casting from any IPTV app on your phone.
Keeping Your LG TV App Updated
Apps installed via Developer Mode won’t auto-update through the LG Content Store. Check back periodically and reinstall the latest APK version if a channel category stops loading correctly after a provider-side update.
Comparing Setup Methods by Effort Level
The LG Content Store method takes under five minutes when a compatible app is available, Developer Mode sideloading takes roughly 15-20 minutes including PC setup, and screen casting is instant but requires your phone to stay on throughout viewing. Most users start with casting to confirm their subscription works, then move to a permanent installed app once they’ve settled on a preferred one.
Regardless of method, keeping your LG TV’s system software updated avoids the compatibility hiccups that occasionally affect app installs after a major webOS update.
Which Method Should You Choose?
Start with the LG Content Store if your preferred app is listed — it’s the fastest and most officially supported route. If it’s missing, Developer Mode sideloading gives you the widest app selection, while casting remains the best zero-setup fallback for quick, occasional viewing on a TV you don’t want to modify.
Getting Help If You’re Stuck
If none of the three methods work smoothly on your specific LG model, reach out to IPTV Stremio support with your exact webOS version — device-specific guidance is often available even for less common older TV models that aren’t covered by general setup guides.
What to Expect After Setup
Once your chosen method is working, day-to-day use on an LG TV feels identical to any pre-installed app — select it from your home screen, and your channels and EPG load automatically using your saved IPTV Stremio credentials. No repeated logins or reconfiguration should be needed unless you factory-reset the TV or switch to an entirely different app.
Frequently Asked Questions
Does LG webOS support Stremio directly?
Not natively — casting from a phone or PC running Stremio is the simplest route on LG TVs.
Will sideloading void my LG TV warranty?
No, LG’s own Developer Mode tool is an official, supported feature.
Try IPTV Stremio free and get it running on your LG Smart TV today.
